Foundation Repair Methods Steps

♦ December 23, 2012 ♦ Leave Your Comment

Vacuum Box Testing is a test method that is used to detect leaks. It is a practical way of testing in comparison to the quantitative measures used to examine objects. Vacuum Box Testing can be used to test objects on which a pressure differential can be created across the area to be examined. The common application areas of Vacuum Box Testing include piping systems, pressure vessels, and storage tanks.There are various types of boxes or frames used in Vacuum Box Testing depending upon the application area. Vacuum box inspection of lap welds, butt welds and fillet welds. These vacuum boxes are used to examine a small and specific portion of the welded area to produce accurate results. The vacuum boxes used in vacuum box testing are fabricated of thick, clear Perspex with a closed cell foam seal along the bottom edge.Before proceeding with the vacuum box testing, a vacuum gauge and hose coupling are fitted in the box. Then a soapy solution is put on the line of welding in the testing object. After that the vacuum box is placed over the testing object and a vacuity is created inside the box. Now, the object is observed, if there any drop in the vacuum or bubble formation on the surface then it shows that there is leak in the weld and the object is defected or faulty. Vacuum Box Testing is a very popular non destructive testing method that is widely used to test various objects against defects, flaws, leaks, or other imperfections. It is very efficient and effective way of testing various welded objects for any kind of leaks or defects. There are basically two main types of Vacuum Box systems used for performing vacuum testing (a) High Pressure Models that are mainly used for inspection of above ground storage tanks that have been in service. (b) Low Pressure Models used for weld integrity checks on new tank builds where gross defects are the main concern. Abcndt.com use Vacuum box testing in non-destructive and destructive testing methods to increase customer satisfaction and lower manufacturing costs. They cater to industries, such as automotive, aviation, construction, power plants, manufacturing, railways, military, and naval industry. ABC Testing Inc. have Certified Welding Inspectors (CWI) doing welding inspections for steel, aluminum, specialized metals like Inconel, Monel and NiAlBrz, and many other alloys. The company uses approved procedures to specific industry standard. Browse through www.abcndt.com for more information.

foundation repair methods steps